Questions about TP-Link Deco E4 WLAN Mesh 3-pack Set (AC1200)

You can theoretically connect the TP-Link Deco E4 to the iPhone hotspot, but there are some limitations and potential issues you should be aware of: - The Deco E4 can be connected to an Internet source device via Wi-Fi or Ethernet. An iPhone hotspot can serve as a Wi-Fi source, but the configuration and stability of the connection may vary. - There are reports that the connection between a TP-Link Wi-Fi extender or router and an iPhone hotspot can sometimes be problematic, especially when it comes to creating a server that serves other devices. It may be necessary to adjust specific settings or consult the manufacturer to find the best configuration. - Make sure that your iPhone and the Deco E4 are configured correctly and that the iPhone's hotspot function is working properly. Overall, it is technically possible to connect the Deco E4 to an iPhone hotspot, but you should be prepared to resolve any configuration issues.

Yes, you can use the TP-Link Deco E4 even if you receive the Internet via LTE. The Deco E4 works regardless of the type of Internet connection you have and can work with any Internet Service Provider (ISP) and modem, including LTE modems. However, it is important to note that the Deco E4 does not have a built-in LTE function, so you will need a separate LTE modem to establish the Internet connection. You can then connect the Deco E4 to this modem to create a mesh Wi-Fi network in your home.

The delivery included a short cable (white) (RJ45 LAN cable).

Greetings, Here, for example, Deco-Mesh runs on an old primitive Fritzbox; only LAN connection for the "mother ship" (main Deco device) - the rest works intuitively and with good menu navigation. The advert says: "Compatible with the most important Internet service providers (ISPs) and modems, such as Telekom and AVM modems, so you don't have to change a new modem". Unfortunately, that's all I can article... Good luck.

The only difference is if you want to use the Ethernet ports, the e4 port is fast Ethernet 100mbps max and the d4 port is gigabit Ethernet 1000 Mbps max. So it depends on your subscription. And above all whether you want to use the ports (for example connected directly to a PC) or just the wifi.

Yes

Correct - only one unit is the "boss" - the others "obey", but need a power supply...

Hello I'm not sure, but I thought it should work. You can get advice at the counter and then send it back if it doesn't work out.

One Deco E4 t is powered by a standard 12V power adapter, although I highy recommend do not buy the E4. It has a major flaw and this is it's Ethernet 100Mbit/s ports. Just imagine, your ISP modem or router with 1Gbit contract, you will never be able to get more than 100Mbit with the E4. This is a big no go. I advise you to invest in the M4 system, it comes with similar sized devices and offers 1Gbit/s Ethernet ports. The price difference is very minimal for the M4 set. TP-Link Deco M4 AC1200 Dualband WLAN Mesh 3-pack The M4 also use the same 12 power adapters.

Yes, the TP-Link Deco P9 uses AV1000 pwerline technology that can help overcome long distance using the powerline cabling in buiildings. TP-Link Deco P9 3er-Set I would not advise to buy the E4 system, it only has 100Mbit Ethernet, therefore, if you use the E4 with your Internet service provider mode, you would be stuck with 100Mbit/s even though you have a Gbit contract.

The 100 Mbit/s only refers to the Ethernet connections on the device. More is possible via WLAN in mesh mode. And yes, you only get 100 Mbps from the router via the LAN cable. That's why I recommend this Deco solution: Deco M4 or if you also value integrated antivirus and anti-malware protection, the Deco M5 (I have it and am very satisfied with it). The surcharge for the Deco M5 is very low. M4 and M5 have 2 x Gbit/s Ethernet per device. Yes, from the router it only works with 100 Mbit/s. I recommend either the M4 or M5 (which is what I use). Both have 2 x 1 Gbit/s connections per device. By the way, you can also mix the different decos. They all work together. The M5 can do more, is faster and also has integrated antivirus and antimalware protection (Homecare, free for everything that comes with it). This is the M5 set: TP-Link Deco M5 Dual Band WLAN Mesh Set of 3 (AC1300) And here is the M4 set: TP-Link Deco M4 AC1200 Dualband WLAN Mesh 3-pack

Yes, in the app it has the option to switch off the light. For me, it is switched off from 23:00 to 06:00, but Wi-Fi still works.

That's right - just like that

No, must be connected to the mains!

Hello, my dear Galaxusmarsi, this is possible without any problem, as long as you can establish a continuous WiFi network. Depending on the distance, thickness and material of the walls, additional intermediate stations may be necessary. These can be inserted without any problems.

Here is the information provided by the manufacturer for this decoder: - Wireless Standards: IEEE 802.11 ac / n / a 5 GHz, IEEE 802.11 b / g / n 2.4 GHz. - Frequency: 2.4 GHz and 5 GHz - Signal Rate: 867 Mbps at 5 GHz, 300 Mbps at 2.4 GHz - Transmit Power: FCC: <30 dBm, CE: <20 dBm (2.4 GHz), <23 dBm (5 GHz) - Wireless Security: WPA-PSK / WPA2-PSK - Quality of Service: WMM - WAN Type: Dynamic IP / Static IP / PPPoE / L2TP / PPTP - Management: Local and Remote Management - DHCP: Server, Client - Firewall Security: SPI Firewall - Protocols: Supports IPv4 and IPv6 - Guest Network: 2.4 GHz guest network x 1, 5 GHz guest network x 1 - Working Modes: Router, Access Point. According to our research, it would be possible to connect a Swisscom TV Box to one of the ethernet ports. However, we advise you to contact Swisscom to confirm this.

We also use the Deco-Mesh system in the garden - flawlessly... but here there is only 1 (one) storage building in between (so no city garden).

No, German plugs are not included. In Austria the plugs fit as well.

It should be, but not over 4 floors (cellar does not work, no signal). On the third floor, 1 living room, 1 kitchen, 1 bedroom and it works all the way to the garden about 30 m away.