Questions about Sunne Pro300sb

According to the dimensions of the beamer, yes, you can adjust the distances on the bracket.

Yes

Yes, but the original bracket is much more stable.

The Epson TW9200W fits perfectly. There should be no problem with the TW7000. Bracket is flexibly adjustable from the hole spacing. But cannot promise this.

I'm pretty sure no. This projector in the link is for floor mounting (would say mobile projector). The bracket is for ceiling mounting of a flat standard projector.

My Epson beamer is upside down and screwed to the bracket with the feet (adjusting screws). Maybe that works for you too

This should work for said device. It holds up to 25 kg, and should be universal.

Yes, it should fit, it's a universal bracket, so it needs a bit of manual skill. We also had this projector mounted with this bracket.

I don't know how it is with your beamer. My beamer - it is also a few years old - has screws on the underside. The "arms" of the bracket are flexible and can be adjusted to these screws. My beamer hangs upside down on the ceiling. The picture could be reversed in the settings. If your beamer also has such screws and the image can be reversed, it might work. I am satisfied with my bracket.

Yes, according to our information it fits the LG Presto HU80KSW.

Alles dabei.

First, the projector is mounted upside down with the screws. The beamer can be detached from the ceiling fixture relatively easily, but the setup must be adjusted accordingly...The beamer can be detached from the ceiling fixture relatively easily, but the setup must be adjusted accordingly.

Must be a misunderstanding, I didn't find the product in my order list either... Sorry!

Hello ! I have no idea because I don't know the LG projector. However, it's a universal mount that seems to me to have quite a lot of possible settings, so, on the face of it, I'd say it should also fit the LG projector. Be careful though: my Benq mounts upside down, so be sure your projector offers a 180 degree image inversion! I wish you all the best for the holidays! :-)

I can't say for sure - but the bracket is very universally designed and probably compatible with almost all beamers. It should also hold a heavier beamer like the model mentioned.

Yes that works

7cm, 4 holes

The plate on top? 150mm according to the second picture where the dimensions are given. Attached is the whole picture: https://static.digitecgalaxus.ch/Files/4/8/5/7/1/5/9/screenshot%20pro300s%20pdf.JPG

I assume that this is possible. The ACER data sheet says "ceiling mount", which is what the Sunne Pro300SB is. I cannot guarantee it.

It's been a while for me, but as far as I remember, I didn't have to get any extra screws. In fact, I'm pretty sure that yes, they are included. Kind regards

According to our clarifications, it should fit.

This is a universal mount and should therefore fit.