CHF150.–
G.Skill Trident Z Neo
2 x 32GB, 3200 MHz, DDR4-RAM, DIMM
Questions about G.Skill Trident Z Neo
What would you like to know?
0 questions and answers
Helpful answer
I have been using G.skill since DDR2 and none of them have ever broken. And I have also tortured them and sometimes even cooled them with water. Therefore, I can only recommend the G.Skill brand :-)
https://www.gskill.com/specification/165/326/1578906066/F4-3200C16D-64GTZN-Specification
No, they are Hynix. I think A-Die.
Helpful answer
it should be a setting in the bios or icue, they always go off for me...
Don't see why it shouldn't work on this board. I have them installed on an X570-E with a Ryzen 7 5800x and have had no problems so far. Greetings
Helpful answer
You can usually find information about RAM compatibility on the manufacturer's website. https://rog.asus.com/ch-de/motherboards/rog-zenith/rog-zenith-extreme-alpha-model/helpdesk_qvl With the manufacturer's number of the RAM, you can then see which ones are supported. I could not find this RAM among the listed models.
Hi, it will work but if you are into optimization take rather the RGB trident which are for intel the neo trident are more opti for AMD but will also work for Intel no problem.
Yes, they are compatible. Should perform well, but I'm not familiar with the A-XMP function of the mainboard.
Helpful answer
I have just put this exact combination into operation and so far it works perfectly. However, I had to adjust the RAM speed in the bios from 2666 to 3200 Mhz.
Solche hier?: https://www.digitec.ch/de/s1/producttype/ram-2?opt=v10-913%3A14&pdo=10-3195%3A8135%7C10-419%3A185105%7C10-420%3A279128%7C10-420%3A296081%7C10-420%3A421677%7C10-420%3A296034%7C10-420%3A300164%7C10-420%3A307985%7C10-420%3A393454%7C10-420%3A299093%7C10-420%3A454263%7C10-420%3A454142%7C10-420%3A428212%7C10-420%3A462232%7C10-420%3A471586%7C10-420%3A520565&tagIds=76
Helpful answer
For me, that would probably not fit. I already had problems with my water cooling or the hose outputs. I can only operate my mainboard with 2x Ram modules. But I think that is also a little dependent on the respective mainboard. Maybe someone knows another solution.
Hello, yes it does :) the gskill ram configurator on their website will help you choose the one you need depending on your chipset ;)
Yes it is also Intel compatible, you can check the list of Intel compatible motherboards here :https://www.gskill.com/qvl/165/326/1562840461/F4-3600C18D-16GTZN-Qvl
...sure!
Yes, that is possible.
Helpful answer
That should work
Helpful answer
I also searched for a while, just go to EZ Mode (F7) and activate XMP Mode. (https://rog.asus.com/forum/showthread.php?110654-ASUS-ROG-STRIX-Z390-E-Gaming-Issue). Then reboot and everything works.
Helpful answer
Hello, I recently bought the bars together with the 3900x and the Asus TUF Gaming X-570. They work perfectly, even with the XMP/D.C.O.P setting. Difference between the N and NC model is the latency: N has 16-16-16-36, NChat 16-19-19-39 (all according to G.Skill homepage).
Helpful answer
Hallo, here you will find your information. https://www.gskill.com/product/165/326/1562838932/F4-3200C16D-32GTZNTrident-Z-NeoDDR4-3200MHz-CL16-18-18-38-1.35V32GB-(2x16GB)
Hello, this memory module is not on the compatibility list. https://www.msi.com/Motherboard/support/MPG-X570-GAMING-EDGE-WIFI#support-mem-19
they just about fit (if all specifications are correct), but you have nothing from rgb, because everything is just covered up
...the DDR4-3200 CL14 will certainly also run on DDR4-3600 CL16 without any problems!
You need to email digitec customer service about stock availability of future products. This is for questions about a different specific product. :)
27 of 27 questions