Questions about Digitus DN-19 12U-6/6 Wall cabinet

So that comes with the rack frame inside. You can install 19-inch devices directly. You still have to pay attention to the depth, especially deep devices don't fit in there. Or do you mean something else?

To mount a mainboard in a server enclosure, you usually need special brackets or adapters, as mainboards cannot be mounted directly on the 19-inch rack profiles. The server enclosure offers 19-inch rack profiles that are designed for mounting network devices and server components. You will therefore need additional brackets or a rackmount kit specially designed for mainboards.

This cabinet has a hole on all 4 corners, so these Digitus castor set would fit better

This enclosure only has front and rear mounting rails. https://www.assmann.com/de/produkte/netzwerk-und-serverschraenke/netzwerkschraenke-wandmontage/19-wandgehaeuse-montiert/dn-19-12u-66/

This is a wall-mounted network cabinet designed for patch panels and network, switches, etc. For a NAS with these dimensions, a server rack is more likely to be needed. By the way, the installation depth of this wall cabinet is 450 mm. (The selected NAS is already 531.5mm long without cables). Better to buy a shelf and install a tower NAS if it is to be a wall cabinet/network cabinet.

Hello , this is not a problem at all. This rack is designed for this type of content. In any case, the wall should be suitably solid and the dowels/screws also suitably approx. 8 x 60mm screws and 10 mm dowels. Greetings tecnoman

I have a total of 5 NAS (10 HDD) in the rack and you can't hear anything. However, I have installed appropriate rack shelves, so I don't know what it would be like if they were placed directly on the floor and the viruses spread across the floor.

What do you want to know specifically? The mounting of all racks in the rack is done with cage nuts and the appropriate screws. Except for the roof fans. In this case, I would check with the manufacturer which accessories fit and then search here with the exact manufacturer's article number, as the accessories in the Digitec shop don't always really fit. At digitus, for example, here: https://www.digitus.info/de/produkte/netzwerk-und-serverschraenke/netzwerkschraenke-wandmontage/19-wandgehaeuse-montiert/ Otherwise, also search for network cabinet on YouTube.

We first installed the fixed feet on this rack, but assuming that it is the same thread size, it works. The holes are there in any case.

Anything built for 19" can be installed. There is also the option of installing shelves if the units do not fit or no rack-mount kits are available (simply place them on top).

The cabinet has corresponding openings on the floor, but I don't know if feet were included. Especially as this makes no sense IMHO for the size of the cupboard.

Unfortunately, I couldn't find this information anywhere at the manufacturer's or on the web in general. With a bit of luck, someone else will answer your question.

This is quite possible. Here is the necessary article: Digitus DN-19 CASTOR Feststellbare Laufrollen für Netzwerkschränke

Unfortunately this rack is not adjustable so you can not remove the bottom panel.