Questions about Cooler Master MasterBox Lite 5 RGB

Fits perfectly in the front. The cables have enough space and can be inserted easily.

Hello Rojickovi mATX works, I have also installed myself, just asus but they are standardised mainboards. I don't know the dimensions of the RX570, but I assume that it fits. I have installed a GTX 1660 ti myself and it fits without any problems.

...gibt besseres!

no problem for this box :)

I think you are talking about the front fan to the mainboard? There is a 3-1 splitter cable included, see: https://static.digitecgalaxus.ch/Files/1/0/0/9/9/3/4/2/Produkt-Datenblatt_-_MasterBox_Lite_5_RGB.pdf and https://www.youtube.com/watch?v=-u1WYOgKApw

To change the colours of the fans, I think you need an RGB controller.

Yes, the form factor of the enclosure is ATX, so you won't have any problems. :)

Depends on your mainboard... With my Gygabyte mainboard, Gygabyte's own RGB software worked perfectly with this case. Just make sure that the motherboard has an RGB connector and then it will work with Asus aura.

No!!!

It depends on the software, if you want to control the PC with it, then you just control the fans and for that you need the controller. I have the case myself and don't have these problems. Otherwise you have to see if you can add a keyboard in this software.

Yes, Compatible with ASRock, ASUS, Gigabyte and MSI RGB Suites

No

Yes, Digitec delivers free of charge.

Nein ich denke nicht dass das dabei ist. Das ist ein standard produkt von coolermaster: http://www.coolermaster.com/case/case-accessories/universal-graphics-card-holder-3-supports/ hier bei digitec z.bsp Cooler Master MasterAccessory Universal VGA Holder

Yes it's possible, but very awkward as you have to mount the cooler from the inside through the case fans which is a bit tricky. I would recommend the 120 as it can easily be mounted on the rear fan and you get more of the LEDs, which don't really come into their own in my build. Another option would be to remove the three case fans and just mount the HYPER radiators. I wouldn't recommend this, as there is already little air coming in through the small openings.

Of course they are always with the PC cases, otherwise it is impossible to install the motherboard

Yes it does, it's an ATX mainboard and they are supported according to the manufacturer's site :) and I can confirm that, I have this case with an Asus b350-f Gaming and the form factor is the same.

Yes, both have ATX format.

It should be able to some driver from the mainboard.

According to the manufacturer's website -> http://www.coolermaster.com/case/mid-tower/masterbox-lite-5/ The radiator should have room in there.