Pilz PSEN cs5.1p Slim Non Contact Switch

Supply voltage: 24 V dc
Housing material: Plastic
Connection type: M8
Range: PSENcode
Protection class: IP66, IP67
Actuator included: Yes
Width: 26.4 mm

The safety level PLe (Cat. 4)/SIL CL 3 is only achieved when the safety outputs use 2-channel processing. EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level low, type 4. CE, TÜV, UL/cUL, FCC, IC, ECOLAB. Actuating element. Slim contactless PSENcode safety switch, coded. The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only operate when used with an actuator from the PSEN cs1.1 series. The actuator can be used and reset an unlimited number of times.

Features and benefits:

• Transponder technology for presence detection
• Coded switch
• Two-channel operation
• 2 safety inputs for series connection of multiple safety switches
• 2 safety outputs
• Safety device diagnostics (SDD)
• Safety device diagnostics can be used to retrieve sensor information, perform actions, and read configuration parameters
• Diagnostic input for Y1 for safety device diagnostics (SDD)
• Signal output/diagnostic output Y32 for safety device diagnostics
• LED display for detecting the status of the actuator, the status of the inputs, and the supply voltage/error
• Protection class IP66/IP67

PSEN cs5.11: 1 actuation direction with 3 approach directions: square marking for normal operating distance, 8-pin M12 connector, 30 N holding force.
PSEN cs5.1p: 4 actuation directions with 3 approach directions each: square marking for normal operating distance and triangular marking for short operating distance, 8-pin M8 terminal block.