Keeppower 14430

High-quality cell with long lifespan and high cycle stability. Keeppower 14430 lithium-ion battery with PCB protection against short circuit, overcharging, and deep discharge. Seiko (Made in Japan). Designed for use in flashlights, LEDs, battery carriers, etc.

Cell: DLG ICR14430
Model: P1443C
Capacity: 700mAh
Min. Capacity: 650mAh
Nominal Voltage: 3.7V
Charge Termination Voltage: 4.2V ± 0.05V
Discharge Termination Voltage: 2.75V
Positive terminal raised (Button Top)
Max. Discharge Current: 2C = 1.4A
Chemistry: LiCo (ICR)
Integrated PCB protection circuit: 5A
Charging method: CC-CV
Diameter: 14.35 mm ± 0.15 mm
Height: 46.10 mm ± 0.15 mm
Weight: 18 g ± 1 g
Manufacturer: Keeppower

Safety Notes: Please note that removing or damaging the protection electronics (PCB) or the safety casing (shrink wrap) can lead to a short circuit, fire, or explosion. Please read and follow the included information sheet before use.

Additional Features: Lithium-ion batteries are thermally stable and do not suffer from memory effect. They operate on the basis of lithium and are characterized by a high energy density.

Technical Data for "Keeppower 14430 - 700mAh, 3.7V Protected Li-Ion Battery":
Standard Charge Current/Charging Time: 50mAh - 250mAh / 6h - 3.5h
Fast Charge Current/Charging Time: 250mAh - 500mAh / 3.5h - 3h
Operating Temperature for Charging: 0 °C - 45 °C
Operating Temperature for Discharging: -20 °C - 60 °C

Notes: Charging lithium-ion batteries requires a special charger that charges the batteries according to a specific charging method (CCCV = constant current, constant voltage). The batteries must not be charged above a voltage of 4.2 volts, as this poses a risk of fire and explosion. It is advisable to charge the batteries only up to about 4.1 volts, as this significantly increases the lifespan or number of charge cycles (potentially up to doubling).