Eltako Radio DALI gateway

Funk-DALI-Gateway, bidirectional. Standby loss of 2 watts. Mounting, for example, in false ceilings and luminaires. 252 mm long, 46 mm wide, and 31 mm high. With cable strain relief. Supply voltage 230 V at terminals N and L. At the DALI +/- terminals, 16 V DC/130 mA is provided for up to 64 DALI devices. The FDG71L gateway controls DALI devices with EnOcean radio transmitters. Groups 0-15 can be controlled, and the broadcast command can also be issued. Additionally, DALI scenes 0-15 can be controlled. Therefore, DALI installations that are to be fully controlled with the FDG71L must be configured in groups 0-15. The FDG71L internally stores the dimming value for each of the groups 0-15 and provides this value as feedback. The same feedback telegrams are generated as with a FUD71. The feedback from the device addresses corresponds in ascending order to the dimming values of the DALI groups 0-15. Feedback can be individually switched from dimming value telegram (%) to switch telegram (on/off) per group using PCT14. Thus, actuators can be controlled with the feedback. The FDG71L fulfills the functions of the DALI master and the DALI power supply. Note: Radio buttons require a double-click for manual learning into the FDG71L! A single click is sufficient for CLR. A directional button or universal button with the same ID and the same button cannot be learned multiple times into different groups. The last selected group always applies. A button can therefore either control only one group or, with broadcast, all groups. One FBH can also be learned per group. When learned manually, this always acts independently of brightness. With PCT14, the brightness threshold can also be set. For the FBH of all groups, the delay time for switching off after no movement can be set together in minutes (1-60). The default is 3 minutes.