Eltako FRP62-230V

Eltako Wireless Repeater FRP62-230V

Manufacturer: Eltako
Designation: Wireless Repeater
Type: FRP62-230V
Bus System KNX: no
Bus System KNX-Wireless: no
Bus System Wireless Bus: yes
Bus System LON: no
Bus System Powernet: no
Other Bus Systems: none
Installation Type: Flush-mounted
Nominal Voltage: 230 V
Protection Class (IP): IP20
Minimum Depth of Device Box: 22 mm

The Eltako Wireless Repeater FRP62-230V is a 1- and 2-level wireless repeater with a standby loss of only 0.7 watts. It is suitable for flush mounting and has dimensions of 49x51 mm with a depth of 20 mm. The connection terminals are plug terminals for wire cross-sections from 0.2 mm² to 2.5 mm².

The supply voltage is 230 V. This repeater is necessary when structural conditions prevent uninterrupted reception or when the distance between the wireless switch and receiver is too great. If the supply voltage is only connected to terminals L and N, the 1-level mode is active. In this mode, only the wireless signals from sensors are received, checked, and retransmitted at full transmission power. Wireless signals from other repeaters are ignored to reduce data volume.

If, in addition to the supply voltage, the phase is connected to terminal Level 2, the 2-level mode is active. In this mode, in addition to the wireless signals from sensors, the wireless signals from 1-level repeaters are also processed. A wireless signal can thus be received and amplified a maximum of 2 times. Wireless repeaters do not need to be programmed. They receive and amplify the wireless signals from all wireless sensors within their reception range.

EAN: 4010312320310.