Eltako FPLT14

Eltako radio power tunnel gateway FPLT14

Manufacturer: Eltako
Designation: Radio power tunnel gateway
Type: FPLT14
Bus system KNX: No
Bus system KNX radio: No
Bus system radio bus: Yes
Bus system LON: No
Bus system Powernet: Yes
Other bus systems: Without
Radio bidirectional: Yes
Version: Radio interface manufacturer-specific
Mounting type: REG
Width in subdivision units: 2
Disassembly protection: No
With LED display: Yes
Updateable: No
Operating voltage: 12 V
Voltage type: DC
Power consumption: 0.4 W
Protocol: Other
Provider-dependent: No
Visualisation: Yes
Web server: No
Radio interface: Yes
IR interface: No

Eltako radio power tunnel gateway FPLT14: Further details
Radio powerline tunnel gateway. Uni- and bidirectional. Stand-by loss only 0.4 Watt. Modular device for mounting on DIN-EN 60715 TH35 rail. 2 pitch units = 36mm wide, 58mm deep. Supply voltage: 230V. Connection to Eltako RS485 bus. Cross wiring bus and power supply with jumper. This gateway transmits RS485 bus telegrams with Powerline over long distances via the power supply network. At least 2 pieces of FPLT14 are required for this. Unidirectionally, up to 10 PCLT14s can send the bus telegrams of their FAM14/FTS14KS installation with Powerline via the mains to another FAM14/FTS14KS installation via a PCLT14 there. Teach in up to 120 telegram IDs according to the operating instructions, also with PCT14. Bidirectionally, 2 PCLT14s can exchange the bus telegrams of 2 FAM14/FTS14KS installations with Powerline via the mains. Teach-in up to 120 telegram IDs according to the operating instructions, also with PCT14. Due to the transmission delay, short click evaluations for FUD and FSB actuators are not possible with certainty.