Eltako FMZ14 RS485 Bus Actuator Multif.

Eltako Multif. time relay FMZ14 Manufacturer: Eltako Designation: Multif. time relay incandescent lamps 2000W Type: FMZ14 Bus system KNX: no Bus system KNX radio: no Bus system radio bus: yes Bus system LON: no Bus system Powernet: no Other bus systems: without Radio bidirectional: yes Mounting type: REG Width in pitch units: 1 On-site/manual operation: no With LED display: no Max. Switching capacity: 2000 W Max. Max. switching capacity LED: 400 W Output power: 2000 W Max. number of switching outputs: 1 number of switching outputs: 1 Max. Rated current: 10 A Rated operating voltage: 12 V Different phases connectable: no With bus coupling: yes Bus module removable: yes Modular expansion possibility: no Protection class (IP): IP20Eltako multif. time relay FMZ14: more detailsMultifunctional time relay with 10 functions, 1 changeover contact floating 10A/250V AC, 230V-LED lamps up to 400W, incandescent lamps 2000W*, with DX technology. Bidirectional. Stand-by loss only 0,4 Watt. Modular device for mounting on mounting rail. Connection to Eltako RS485 bus. Cross wiring bus and power supply with jumper. Wireless window/door contacts (FTK) can be taught-in with the function normally open or normally closed when the window is open. If a direction switch is taught-in, a function (e.g. TI) can be started with the upper button (START) and stopped with the lower button (STOP). To do this, simply connect the N conductor to the terminal (N) and L to K (L). This results in an additional stand-by loss of only 0.1 Watt. When the supply voltage fails, both contacts switch off. When the supply voltage returns, contact 1 closes. Times between 0.5 seconds and 10 hours can be set. The upper and middle rotary switches are used to teach-in and then set the time. The LED under the upper rotary switch accompanies the teach-in process according to the operating instructions and indicates control commands during operation by flashing briefly. , EAN: 4010312313787