EKWB EK-Loop vertical graphics card holder Evo with riser PCIE 4.0 cable

With the black vertical graphics card holder from EK Water Blocks, a graphics card can be installed vertically in a tower case. The EKWB Vertical GPU Holder EVO consists of a PCIe riser cable and a special PCI slot bracket. The adapter bracket is mounted slightly offset to the rear at the PCI slots of the case. For installation, at least six PCI slots should be free, and the graphics cards must not exceed a height of three slots. Note: Only compatible with cases that have a separate and open PCI slot design. Is your graphics card installed vertically, sagging and ruining the flawless look of your system? The EKWB Vertical GPU Holder EVO is screwed into the lower two stand-off holes for ATX motherboards. This keeps your motherboard stable, and the graphics card sits symmetrically and straight in your system. The riser cable connects the graphics card to the PCIe slot on the motherboard. Its x16 slot is electrically connected with a full 16 data lanes, providing the full bandwidth for graphics cards. A 20-centimeter long, flexible flat ribbon cable is used for data transmission. The small board with the PCIe x16 card slot is secured to the graphics card holder with two screws. Technical details: - Material: Steel (powder-coated) - Color: Black - Cable length: 200 mm - Connections: - Connector: PCIe with 16 lanes - Socket: PCIe with 16 lanes angled at 90° - Supported PCI Express standards: 1.x, 2.x, 3.0, 4.0 - Maximum height of the graphics card: 3 slots - Delivery includes: - EK-Loop Vertical GPU Holder EVO - Holding mechanism with mounting materials - Premium PCIe riser cable - DisplayPort 1.4 cable with angled connector.