Aquatuning 13mm hose connection High-Flow

High-quality and robust hose connector with a cylindrical thread. This hose connector is suitable for PVC, PU, PA, silicone, or PE hoses with a 13 mm inner diameter. It features a 1/8 inch outer thread with an integrated 1/8 inch Perbunan sealing ring.

Note for water cooling beginners: The connectors for inch hoses (7/16“, 3/8“, ½“) in our shop are labeled with a mm specification. This may vary by ±1 mm, which is not an issue since a hose clamp is required for installation. If you want to install the hose without a hose clamp, you need to choose a larger connector. For some connectors that tend to deviate upwards, it may also be possible for a 13 mm connector to seal on a hose with a 13 mm inner diameter even without a hose clamp.

Overview:
10 mm (3/8”) hose clamp: none up to 8 mm, required from 10 mm
10 mm (7/16”) hose clamp: none up to 8 mm, required from 10 mm
12 mm (1/2”) hose clamp: none up to 11 mm, required from 12 mm
13 mm (1/2”) hose clamp: none up to 11 mm, required from 13 mm.