Aquatuning 13mm hose connection High-Flow

13 mm hose connector made of nickel-plated brass with O-ring for PVC, PU, PA, silicone, or PE hoses with an inner diameter of 11-13 mm. G1/8" external thread. Inner diameter of the connection: 13 mm. This hose connector is specifically designed for high flow systems. Note: For securing the hoses, we recommend using cable ties for safety. Note for water cooling beginners: The connections for inch hoses (7/16“, 3/8“, ½“) are labeled with a mm specification in our shop. This may vary by ±1 mm, which is not an issue as a hose clamp is required for installation. If you want to install the hose without a hose clamp, you need to choose a larger connector. For some connectors that tend to deviate upwards, it may also be possible for a 13 mm connector to seal on a hose with a 13 mm inner diameter even without a hose clamp. Overview: 10 mm (3/8“) hose clamp: none up to 8 mm, required from 10 mm; 10 mm (7/16“) hose clamp: none up to 8 mm, required from 10 mm; 12 mm (1/2“) hose clamp: none up to 11 mm, required from 12 mm; 13 mm (1/2“) hose clamp: none up to 11 mm, required from 13 mm.