Aplic Inline amplifier, satellite line amplifier, Inline 5 - 2400 MHz SAT amplifier, F sockets

Enjoy a clear television picture again!

The satellite repeater boosts the useful signal by up to 20 dB. This can make the difference between undisturbed television reception or permanent dropouts. Even if the satellite aerial is correctly aligned and the latest technology is used, a cable run to the aerial socket that is too long can significantly weaken the picture signal.

You can solve this problem with the short-range SAT aerial amplifier: the inline amplifier improves the signal strength and thus ensures an optimum viewing experience. Thanks to its frequency coverage of up to 2400 MHz, the device also amplifies the particularly sensitive high frequencies, which are otherwise quickly drowned out by noise.

The antenna amplifier is placed between the LNB of the satellite antenna and the SAT receiver or multiswitch and supplied with power from the receiver or multiswitch. An additional power supply is not required.

Technical specifications

• Input: 1 x F connector

• Output: 1 x F plug

• Connection via F connection sockets

• Voltage: 15 V DC (+/- 3 V)

• Gain (SAT): 20 dB ± 2

• Noise figure: max. 4.5 dB

• Impedance: 75 Ohm

• Frequency range (satellite): 5 - 2400 MHz

• Power supply via the coaxial cable

• Compatible with all satellite systems

• DC pass-through, suitable for DiSEqC, Unicable, SatCR, HDTV, Ultra HD, UHD, DVB-S2

Scope of delivery: SAT/BK antenna amplifier 5 MHz - 2400 MHz plus operating instructions

Dimensions: H 15.5 mm x W 68 mm x D 26.5 mm |Weight: 32 g | Colour: silver.