ABB Installation contactor

ABB Stotz S&J Installation Contactor ESB25-20N-06

Manufacturer: ABB Stotz S&J
Designation: Installation Contactor 2S/0Ö 230-240V AC/DC
Type: ESB25-20N-06
Rated Operating Voltage: 220..400 V
Rated Operating Current: 25 A
Usage Category: 7
Rated Control Voltage: 230 V
Type of Operating Voltage: AC/DC
Type of Control Voltage: AC/DC
Number of Contacts as Normally Open: 2
Manual Control Switch: No
Width in Division Units: 2
Installation Depth: 58 mm
Additional Devices Possible: Yes
With Day/Night Function: No
Hum-Free: Yes
Protection Class (IP): IP20

ABB Stotz S&J Installation Contactor ESB25-20N-06: Further Details
2-pole contactors EN25..N with a width of 36 mm control loads up to 25 A and are available in various contact configurations and coil voltages. They switch electric heating devices, water heaters, motors for pumps, ventilation, and other drives as well as lighting. Thanks to an integrated coil circuit, they operate with both AC and DC control voltages. Therefore, the devices are completely hum-free and quiet during switching. EN25..N features an integrated switch for selecting between three operating modes: manually off (even with control signal present), automatic operation (normal contactor function), and manually on with a return to automatic operation as soon as the coil is powered again. This offers numerous advantages: for example, during commissioning, a functional test of the load circuit can be performed even without a control signal, and the load circuit can be quickly and easily switched off at any time with an existing control signal. An auxiliary switch that can be mounted on the left side as an accessory, as well as sealing caps and a spacer, complete the range. EN25..N has an installation design and meets, among other standards, the household standard EN61095, making them particularly suitable for panel installation.