You're not connected to the Internet.

Play-Zone Wayne and Layne Bricktronics MegaShield

Build awesome mechatronic contraptions using LEGO Mindstorms NXT motors and sensors and your Arduino Mega
Art-Nr 5999048
 Currently unavailable. Delivery date unknown.

Availability

  • Currently unavailable. Delivery date unknown.

Information subject to change.

View details

No ratings have been submitted yet for this product.

Rate this product

Description

Build robots and contraptions! Experiment with mechatronics using
Arduino and LEGO Mindstorms NXT!

Use the Bricktronics Megashield Kit to connect up to six LEGO NXT
motors and four LEGO NXT sensors to an Arduino Mega.

* Supports up to six LEGO NXT motors, and reading their encoders
* Supports up to four simultaneous LEGO NXT sensors
* Supports LEGO NXT touch sensors on all four sensor ports
* Supports LEGO NXT 2.0 color sensor on all four sensor ports
* Supports LEGO NXT ultrasonic sensor on all four sensor ports
* Uses standard LEGO NXT cables
* Tested compatible with the Arduino Mega 2560, but should work on
many other Arduino compatibles

Solder the kit, download the easy-to-use Arduino library, check out
the examples, and start building!

We now have pre-assembled Bricktronics Megashields available for
purchase. Use the Options box to select an Assembled shield and it'll
arrive ready to go.

SEE IT IN ACTION!

READING A COLOR SENSOR WHEN A BUTTON IS PRESSED

KIT CONTENTS

The kit contains a Bricktronics Megashield printed circuit board, ten
custom injection-molded NXT-compatible sockets, a 2.1mm DC power
supply socket, eight jumpers, three 0.1 uF ceramic capacitors, a 6mm
reset pushbutton, six 100 k resistors, three 100 uF electrolytic
capacitors, three 10 uF electrolytic capactitors, three L293D H-Bridge
motor-driver chips, one PTC over-current protection fuse, and headers.

OPTIONS

The Bricktronics Megashield can be purchased in two kit configurations
-- Pre-assembled, or as a solder-it-yourself kit. Neither option
supports the "stacking headers" that many Arduino shields use to
permit stacking multiple shields (due to interference between the
motor ports and the stacking headers), which means that you must place
the Megashield as the top shield of your stack.

WHAT YOU NEED

The Bricktronics Megashield Kit connects an Arduino Mega to LEGO NXT
motors and sensors. Arduino, motors, sensors and NXT cables are not
included. The Mindstorms NXT 2.0 set includes three motors, two touch
sensors, one color sensor, one ultrasonic sensor, and a variety of NXT
cables.

Motors take more power than can be supplied by a USB cable (USB is
limited to 500 mA maximum). The LEGO NXT motors typically need about
600 mA each, but under heavy loads can require up to 1000 mA peak per
motor. Our 9V 2A wall adapter works great for a couple motors, but any
2.1mm 9V adapter with sufficient current should work. Driving 5 or 6
motors with heavy loads will require a beefy power supply on the order
of 3-5 amps. If you want to power your creations on the go, our 6 AA
battery pack works well

BUILD IT

If you don't buy the pre-assembled version, the Bricktronics
Megashield Kit is a through-hole soldering kit. It requires basic
soldering skill. At a minimum, you'll need a soldering iron, solder,
and a diagonal cutters. Clear instructions [1]are available at the
Bricktronics Megashield project webpage.

It usually takes under an hour to build, but it may take more or less
time depending upon your experience with soldering.

OPEN SOURCE HARDWARE

This kit is open source hardware. We make the hardware source files
like the schematic and the pcb files available for anyone to use as
long as they credit us and release any modifications as open source
hardware. The schematic and pcb files are available on the
Bricktronics downloads page [2].

NOTES

A portion of the profits of this kit go to John Baichtal, an author of
the Make: Lego and Arduino Projects book.

Wayne and Layne, LLC and our products are not connected to or endorsed
by the LEGO Group. LEGO, Mindstorms, and NXT are trademarks of the
LEGO Group.

Links:
------
[1]
http://www.wayneandlayne.com/projects/bricktronics-megashield/build/
[2] http://www.wayneandlayne.com/bricktronics/downloads/
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Play-Zone
Product type Electronics module
Item number5999048
Manufacturer no.P00000711

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: galaxus@galaxus.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Currently unavailable. Delivery date unknown.
We do not have any information regarding the delivery date. It will be shown as soon as it's known.

Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the Galaxus community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the Galaxus community.

(0)
Rate product
Play-Zone Wayne and Layne Bricktronics MegaShield Play-Zone Wayne and Layne Bricktronics MegaShield