You're not connected to the Internet.
CHF 6.90

Adafruit Industries Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board

Art-Nr 5998725
 approx. 5-7 days Currently > 5 piece(s) in stock at the supplier

Availability

  • approx. 5-7 days
    Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

No ratings have been submitted yet for this product.

Rate this product

Description

Spin two DC motors or step one bi-polar or uni-polar stepper with up
to 1.2A per channel using the DRV8833.

This motor driver chip is a nice alternative to the TB6612 driver.
Like that chip, you get 2 full H-bridges, but this chip is better for
low voltage uses (can run from 2.7V up to 10.8V motor power) and has
built in current limiting capability. We set it up for 1A current
limiting so you don't get more than 2A per chip, but you can also
disable the current limiting, or change it to a different limit!

We solder on DRV8833 onto a breakout board for you here, with a
polarity protection FET on the motor voltage input. Each breakout chip
contains two full H-bridges (four half H-bridges). That means you can
drive two DC motors bi-directionally, or one stepper motor. Just make
sure they're good for about 1.2 Amp or less of current, since that's
the limit of this chip. They do handle a peak of 2A but that's just
for a short amount of time, if you turn off the current limiting we
set. What we like most about this particular driver is that it comes
with built in kick-back diodes internally so you dont have to worry
about the inductive kick damaging your project or driver! You also
don't have to worry as much about burning out the chip with
overdriving since there is current limiting.

There's two digital inputs per H-bridge (one for each half of the
bridge), you can PWM one of the inputs to control motor speed. Runs at
2.7V-10.8V logic/motor power. The motor voltage is the same as the
logic voltage, but logic voltage from 2.7V or greater will work so no
need to worry if you are powering the motors from 9V and using 3.3V
logic.

Comes as one assembled and tested breakout plus a small strip of
header. You'll need to do some light soldering to attach the header
onto the breakout PCB. Arduino, motors, and power supply not included.

* Size: 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1"
* Weight: 1.5g
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Adafruit Industries
Product type Electronics module
Item number5998725
Manufacturer no.ada-3297

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: galaxus@galaxus.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Expected delivery time: approx. 5-7 days
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

 Expected delivery time: approx. 5-7 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the Galaxus community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the Galaxus community.

(0)
Rate product
Adafruit Industries Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board Adafruit Industries Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board