Best selling Striking tool accessories
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Fiskars Rotary splitter
The Safe-T rotating splitting wedge from Fiskars splits particularly hard pieces of wood. Thanks to the grooves on its surface, it has a better grip in the wood and can split more effectively. Its blade, rotated 90 degrees, is also very practical. The Fiskars rotating splitting wedge is made of hardened C40 steel and has a Rockwell hardness of 36-42 HRC. Weighing 2,400 grams, it is very robust and handy. The head of the 24-centimeter long wedge features a special polymer striking surface, which is surrounded by a metal ring. This is specifically designed to dampen the vibrations that occur upon impact, thereby reducing the risk of potential material splintering. The striking surface can be replaced if necessary. The splitting wedge meets European safety standards and carries the "Tested Safety" seal. The exceptional design of this tool has been awarded the prestigious Red Dot Design Award. Additionally, it received the highest rating of "very good" in practical tests from the DIY magazine "Selbst ist der Mann.".
2. Halder Taper punch
The Halder Series 3408 offers punches in three different sizes: D10mm, D12mm, and D15mm. These small helpers are equipped with interchangeable, highly wear-resistant, and splinter-free heads made of special nylon on both ends, allowing for very safe and gentle work with a steel hammer.
Product features:
- The small helpers from Halder have interchangeable heads made of very wear-resistant and splinter-free special nylon on both ends.
- They enable safe and gentle work with a steel hammer.
- Available in D10mm, D12mm, and D15mm.
Areas of application: Assembly, repair, and maintenance work.
Material:
- Inserts: Nylon, white, hard, very wear-resistant, no splintering (even at low temperatures), oil and grease resistant.
- Assembly: Interchangeable nylon inserts.
Application areas:
- Joining of workpieces
- Housing assembly
- Assembly and repair work in the automotive and commercial vehicle sector
- Maintenance work with limited accessibility
- Gentle installation and removal of bushings and ball bearings
Additional technical specifications:
- Weight: 200g
- Inserts: Nylon, white
- Impact: hard
- Inserts: no splintering (even at low temperatures), very wear-resistant, hard, oil and grease resistant
- Nominal size D=15mm.
3. PB Swiss Tools Hammer Handle PB 310
The wooden handles are securely attached to the handle tube with a special wedge and a heavy tension pin. They can still be easily replaced if necessary. The inserts made of particularly tough polyamide are securely anchored to the hammerhead and can be easily swapped out. The metal inserts are securely anchored to the hammerhead with the spiral tension pin and can be easily replaced.
4. BRW Splitting wedge with nylon cap
Splitting wedge with nylon cap, 240 mm
With flat blades and notches.
5. Ochsenkopf Solid aluminium wedge
Ideal for felling and splitting. Sharply angled engraved grooves on the front and double longitudinal grooves on the back prevent the wedge from bouncing back. Also particularly suitable for frozen wood. Extremely stable and especially lightweight.
6. BRW Nylon tapper
The Halder Series 3408 offers mallets in various sizes from D20mm to D50mm. These mallets are essentially a soft hammer without a handle, allowing you to hold the hammerhead directly in your hand. They are not only useful in situations where limited accessibility makes the use of a traditional hammer impossible, but they also enable precise control of striking force, accurate hits, and energy-efficient work. These small helpers are equipped with interchangeable, low-noise, highly wear-resistant, and splinter-free heads made of special nylon at both ends. The mallets are recoil-free, as they are filled with steel shot. This means that upon impact of the striking surface on the workpiece, the shot filling follows with a delay. The reduced recoil allows for optimal utilization of striking energy, enabling joint-friendly and quiet operation.
Product features:
- Recoil-free
- Both ends are fitted with interchangeable heads made of highly wear-resistant and splinter-free special nylon
- Allow for gentle, quiet, and energy-saving work
- Precise dosage of striking effect
- Solution for limited accessibility
- Available in sizes D20mm to D50mm
Applications:
- Can also be used as a punch
- Joining of workpieces
- Housing assembly
- Assembly/repair work in the automotive/commercial vehicle sector
- Maintenance work with limited accessibility
Material:
- Inserts: Nylon, white, hard, very wear-resistant, no chipping (even at low temperatures), oil and grease resistant
- Assembly: Nylon inserts are interchangeable
Application areas:
- Joining of workpieces
- Housing assembly
- Assembly/repair work in the automotive/commercial vehicle sector
- Maintenance work with limited accessibility
- For gentle installation and removal of bushings and ball bearings
Additional technical specifications:
- Weight: 785g
- Inserts: Nylon, white
- Design: recoil-free
- Strike: hard.
7. Halder Impact insert for SIMPLEX soft-face hammer,d.50,TPE-mid
The striking insert for the SIMPLEX soft hammer from Halder is a high-quality accessory specifically designed for use in various craft applications. With a diameter of 50 mm and made from a medium-hard TPE-mid material, this replacement head offers an optimal combination of flexibility and strength. It is ideal for working with delicate materials, as it leaves no color transfer and thus does not damage surfaces. The insert is excellent for natural stone installation, drywall work, furniture construction, tile and slab laying, as well as for paving and masonry work. Using this striking insert ensures precise and gentle workflows, making it an indispensable tool for professionals and DIY enthusiasts alike.
- Made from TPE-mid, a medium-hard, abrasion-resistant material
- Suitable for delicate materials and precise applications
- Ideal for natural stone installation, drywall, and furniture construction
- Prevents color transfer and surface damage
- Lightweight at 85 g for easy handling.
8. BRW Mallet handle
Mallet handle fibre glass, 90cm
With rubber grip.
9. BRW Felling wedges
The felling wedges from BRW are an essential accessory for garden tools, specifically designed for the safe and efficient felling of trees and splitting of wood. Made from high-impact resistant polyamide, these wedges offer excellent durability and resilience, even at extreme temperatures down to -25°C. The cross grooves on the surface prevent slipping during use, enhancing safety and effectiveness in application. Weighing 300 grams, the felling wedges are easy to handle and allow for precise placement. These robust tools are ideal for professional forestry workers as well as hobby gardeners who value quality and reliability.
- High-impact resistant polyamide wedge for maximum longevity
- Cross grooves to prevent slipping
- Functions at extreme temperatures down to -25°C.
10. Halder Fibreglass handle for SIMPLEX soft-face hammer for head Ø 60 mm length 340 mm Fibreglass with
The SIMPLEX fiberglass handles of the 3844 series are designed for SIMPLEX soft hammers with the black reinforced ductile iron casing in sizes D30mm to D80mm. These handles are very stable and durable, making them extremely break-resistant. They feature vibration dampening, an ergonomic shape, and a non-slip grip. Additionally, they have a smooth surface and are inorganic (not moisture-sensitive). A 70cm long sledgehammer handle is also available (for the casing with D80mm).
Product features:
- SIMPLEX fiberglass handle for SIMPLEX soft hammers with reinforced ductile iron casing in sizes D30mm to D80mm
- Very stable and durable
- Extremely break-resistant
- Vibration dampening
- Ergonomically shaped with a non-slip grip
- Smooth surface
- Inorganic (not moisture-sensitive)
- Also available as a 70cm long sledgehammer handle
Material of the handle: fiberglass with rubber grip. Assembly: Fiberglass handles should only be mounted in reinforced ductile iron casings!
Additional technical specifications:
- Weight: 400g
- Designation: SIMPLEX handle
- D 60mm.
Striking tool accessories
CHF28.95
Halder Fibreglass handle for SIMPLEX soft-face hammer for head Ø 60 mm length 340 mm Fibreglass with
Product order
See all products