Best selling Cable holders from Dehn
This page always stays fresh and updates automatically.
1. Dehn Connection clamp 625011 St/tZn 25mm
The connection clamp 625011 from Dehn is a high-quality connection element specifically designed for connecting round conductors, cables, and flat strips to deep earth electrodes. This clamp meets the requirements of DIN EN 62561-1 and provides a reliable and secure connection. It is equipped on one side with a KS connector suitable for round conductors with a diameter of 7 to 10 mm. Made from hot-dip galvanized steel, the connection clamp ensures high corrosion resistance and durability, making it ideal for use in various environments. The robust construction and precise workmanship ensure that the clamp meets the demands of grounding technology. Installation is simple and efficient with an M10 x 25 mm screw.
- Meets the DIN EN 62561-1 standard for grounding systems
- One-sided with KS connector for round conductors of 7-10 mm diameter
- Made from hot-dip galvanized steel for high corrosion resistance
- Easy installation with M10 x 25 mm screw.
2. Dehn Connecting clamp 620015 for round l. 7-10mm fl. 40mm
The connection clamp 620015 from Dehn is a high-quality connection element specifically designed for connecting round conductors, cables, and flat strips to ground rods. It meets the requirements of DIN EN 62561-1 and provides a reliable and secure connection. The design is angled and equipped with a flat round screw, which facilitates installation and ensures a stable connection. This connection clamp is also suitable for uncut ground conductors, highlighting its versatility. Made from hot-dip galvanized steel, it offers high corrosion resistance and durability, making it ideal for use in various environments. The connection clamp is suitable for round conductors with a diameter of 7 to 10 mm and flat conductors up to 40 mm wide, making it a practical solution for different applications.
- Complies with DIN EN 62561-1 standard
- Suitable for round conductors with a diameter of 7-10 mm
- Compatible with flat conductors up to 40 mm wide
- Made from hot-dip galvanized steel for increased corrosion resistance.
3. Dehn Soehne connection clamp 620011 St/tZn 20mm
The Soehne connection clamp 620011 is a high-quality connection solution specifically designed for connecting round conductors, cables, and flat strips to deep earth electrodes. This connection clamp meets the requirements of DIN EN 62561-1 and provides a reliable and secure connection. It is equipped on one side with a KS connector suitable for round conductors with a diameter of 7 to 10 mm. Made from hot-dip galvanized steel, the connection clamp ensures high corrosion resistance and durability, making it ideal for use in various environments. With a diameter of 20 mm, it is designed for deep earth electrodes and offers a simple and effective solution for electrical grounding applications. The robust construction and careful workmanship make this connection clamp a reliable choice for professionals and craftsmen.
- One-sided design with KS connector for round conductors (diameter 7-10 mm)
- Made from hot-dip galvanized steel for increased corrosion resistance
- Complies with the requirements of DIN EN 62561-1
- Suitable for deep earth electrodes with a diameter of 20 mm.
4. Dehn Connection clamp D 25mm for Rd 7-10 649 015
The connection clamp D 25mm from Dehn is a high-quality connection element specifically designed for connecting round conductors, cables, and flat strips to ground rods. This clamp meets the requirements of DIN EN 62561-1 and provides a reliable and secure connection. It is made of stainless steel 316 (V4A), making it particularly corrosion-resistant and suitable for use in demanding environments. The design allows for easy installation, even with uncut ground conductors, and the angled shape ensures optimal force transmission. With a clamping range for round conductors from 7 to 10 mm and a clamping width for flat conductors of up to 40 mm, this connection clamp is versatile. It is an ideal solution for professionals who value quality and durability.
- Made of corrosion-resistant stainless steel 316 (V4A)
- Meets the DIN EN 62561-1 standard for grounding connections
- Suitable for uncut ground conductors
- Clamping range for round conductors from 7 to 10 mm
- Clamping width for flat conductors up to 40 mm.
5. Dehn Roof conductor holder DEHNgrip NIRO H 20mm 206349
The DEHNgrip NIRO H 20mm 206349 roof cable holder is a reliable solution for securing lightning rods and down conductors on rooftops. It has been specifically designed to ensure a safe and stable installation at the lower edge of roof tiles or slates. The pre-formed brace provides optimal support for the cables, while the loose cable management allows for flexible handling. Made from high-quality stainless steel (V2A), this holder not only offers durability but also high corrosion resistance, making it ideal for outdoor use. With a height of 20 mm and a length of 103 mm, the DEHNgrip NIRO is a practical and functional choice for the installation of roof cables.
- Pre-formed brace for stable attachment
- Easy installation at the lower edge of roof tiles
- Made from corrosion-resistant stainless steel (V2A)
- Flexible loose cable management for easy handling.
Cable holders
Quantity discount
CHF12.60 per piece for 3 units
Dehn Roof conductor holder DEHNgrip NIRO H 20mm 206349
6. Dehn PA cable grey f. HVI/CUI cable D 275220
DEHN conductor holder PA grey LHZS20H19IGM8GRPA. Manufacturer: DEHN. Designation: Conductor holder PA grey for HVI/CUI lighting. Mounting type: with screw clamp. Suitable for round conductor diameter: 19 mm. Material of holder: plastic. Mounting type holder: hole with M thread. Material of overlay: plastic. Material of base: plastic. Thread size (metric): 8. Wall spacing: 19 mm. Cable holder for HVI cable (black), HVI cable light, or CUI cable, with two-screw overlay. Made of plastic, for wall mounting. EAN: 4013364103450.
7. Dehn Conductor holder DEHNQUICK NIRO with 390120
Dehn Cable Holder LHDQ6.10ND6X60V2A
Manufacturer: Dehn
Description: Cable Holder
Type: LHDQ6.10ND6X60V2A
Mounting Type for Conductor: with clamp
Suitable for Round Conductor Diameter: 6 to 10 mm
Material of Holder: Stainless Steel (V2A)
Mounting Type for Holder: with dowel
Material of Overholder: Stainless Steel (V2A)
Wall Distance: 0 mm
Dehn Cable Holder LHDQ6.10ND6X60V2A: additional details
Dehnquick cable holder for laying round conductors, e.g., flush-mounted or on the wall (behind the thermal insulation composite system). Version with nail dowel 6 x 60 mm, pre-assembled.
EAN: 4013364346901.
8. Dehn FS connection clamp
Connection clamp to DIN EN 62561-1, for connecting round conductors to air-termination rods using KS connectors.
9. Dehn Connection clamp 620915 Niro for earth rod
The DEHN connection clamp 620915 Niro is a high-quality cable clamp specifically designed for connecting round conductors, cables, and flat strips to ground rods. It meets the requirements of DIN EN 62561-1 and features an angled design with a flat round screw, making it suitable for uncut grounding conductors. Made from stainless steel 316 (V4A), this connection clamp is characterized by its durability and corrosion resistance. With a diameter of 20 mm and a clamping range for round conductors from 7 to 10 mm, as well as a clamping width for flat conductors up to 40 mm, it is versatile in application. This connection clamp is a reliable solution for securely connecting grounding conductors and contributes to ensuring electrical safety.
- Stainless steel 316 (V4A) for high corrosion resistance
- Suitable for uncut grounding conductors
- Clamping range for round conductors: 7 to 10 mm
- Clamping width for flat conductors: up to 40 mm
- Complies with the DIN EN 62561-1 standard.
10. Dehn Earthing pipe clamp D 21mm w. 407012
DEHN Grounding Pipe Clamp ERS21AS4.10TGSTTZN Manufacturer: DEHN Description: Grounding pipe clamp D 21.3 mm TG/tZn Type: ERS21AS4.10TGSTTZN Clamping/holding range: 21 mm Min. clamping/holding range in inches: 1/2 inch Max. clamping/holding range in inches: 1/2 inch Material: Ductile iron Surface protection: Hot-dip galvanized Cross-section of the cable to be connected: 4..70 mm² Number of conductors: 1 DEHN Grounding Pipe Clamp ERS21AS4.10TGSTTZN: additional details Grounding pipe clamp for lightning protection according to DIN EN 62561-1, for integrating pipes into the protective and functional potential equalization according to DIN VDE 0100-410/540 and the lightning protection potential equalization according to DIN EN 62305-3 (VDE 0185-305-3). Version with M10 screws, connection for Rd 4-10 mm or maximum connection conductor cross-section of 70 mm². EAN: 4013364026100.
Product order
See all products