Network cables
−6%
CHF65.90 was CHF69.90 CHF13.18/1m
Cisco SFP-H25G-CU5M= 25GBASE-CU SFP28 Cable 5 Meter
5 m
Best selling Network cables from Cisco
This page always stays fresh and updates automatically.
1. Cisco SFP-H25G-CU5M= 25GBASE-CU SFP28 Cable 5 Meter
The Cisco 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing network applications. The 25G modules are based on the SFP28 form factor.
2. Cisco STACK-T4-1M=
The Cisco Catalyst 9200 Series Switches extend the capabilities of intent-based networking and the innovations in hardware and software of the Catalyst 9000 Series to a broader range of deployments. With their family heritage, the Catalyst 9200 Series Switches offer uncompromising simplicity – they are secure, always available, and simplify IT.
As fundamental building blocks of the Cisco Digital Network Architecture, the Catalyst 9200 Series Switches help customers reduce complexity, optimize IT, and lower operational costs by leveraging intelligence, automation, and human expertise that no other vendor can provide, regardless of where you are on your journey in intent-based networking.
The Catalyst 9200 Series Switches offer security features that protect the integrity of the hardware, software, and all data flowing through the switch. They provide resilience that keeps your business running seamlessly. Combined with the open APIs of Cisco IOS XE and the programmability of UADP ASIC technology, the Catalyst 9200 Series Switches deliver what you need now, with investment protection for future innovations.
With full PoE+ capability, redundant power supplies and fans, stacking bandwidth of up to 160 Gbps, modular uplinks, support for Layer 3 features, and cold patching, the Catalyst 9200 Series Switches are the industry's unmatched solution with differentiated resilience and advanced architecture for cost-effective access to branch offices. They also offer the choice between CLI, Cisco Catalyst Center for local management, or cloud monitoring for Catalyst in the Meraki dashboard.
3. Cisco CB-M12-M12-MMF5M=, 5 m, OM4, MPO, MPO
The Cisco CB-M12-M12-MMF5M= is a high-quality fiber optic cable specifically designed for network connections. With a length of 5 meters and OM4 fiber category, it offers excellent performance for multi-mode applications. The two MPO connectors allow for easy and efficient connections between devices, simplifying installation and operation. The cable is ideal for use in data centers and other environments where high data transfer rates are required. The hole diameter of 50 µm ensures optimal signal transmission and minimizes signal loss. This cable is a reliable choice for anyone seeking a powerful and durable solution for their networking needs.
- OM4 fiber category for high data transfer rates
- MPO connectors for easy installation
- 50 µm hole diameter for optimal signal transmission.
4. Cisco 100GBASE CR4 PASSIVE COPPER
The Cisco 100GBASE-CR4 passive copper cable is a high-performance InfiniBand cable designed for connecting network devices with QSFP28 ports. With a length of 5 meters, it enables efficient data transmission at speeds of up to 100 gigabits per second. This passive copper cable is ideal for use in data centers and high-speed networks where a reliable and fast connection is required. It is compatible with various Cisco models and offers a simple plug-and-play solution for network connectivity. The use of copper technology provides a cost-effective solution, while the passive design eliminates the need for external power supply. The cable is finished in a gray color and features a robust and durable construction that meets the demands of modern network infrastructures.
- Module type: QSFP28 for high bandwidth
- Transmission speed of 100 Gbit/s
- Passive design for easy installation without external power supply
- Compatible with various Cisco and Mellanox devices.
5. Cisco STACK-T1-3M: Stacking cable
The Cisco StackWise-480 Stacking Cable, with a length of 3 meters, is an essential component for connecting Cisco switches within a stacking system. It utilizes advanced StackWise-480 technology, which offers a bandwidth of 480 Gbps and ensures high resilience within the stack. By using Cisco IOS Software SSO, it guarantees that the stack is managed as a single unit, with an active switch taking control and seamlessly switching to a standby switch in the event of a failure. This technology allows for uninterrupted connectivity of access points and the flexible integration of new switches into the stack without service interruptions. The cable is specifically designed for use with Cisco Catalyst 3850 Series switches and supports simplified management through a single IP address and CLI.
- High bandwidth of 480 Gbps for fast data transfer
- Resilient architecture with automatic failover in case of switch failure
- Easy management through a unified IP address and CLI
- Uninterrupted integration of new switches into the stack.
6. Cisco 100GBASE QSFP ACTIVE
Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks.
7. Cisco 10Gbit-CU SFP+
Cisco SFP copper twinax cables are suitable for very short distances. Twinax cables offer an extremely cost-effective way to connect within racks and between adjacent racks.
8. Cisco Passive Copper Cable
The Cisco Passive Copper Cable is a high-performance network cable specifically designed for connecting SFP28 devices. With a length of 2.5 meters, it allows for a direct connection between two SFP28 ports and offers a maximum data transfer rate of 25 Gbit/s. This cable is ideal for use in data centers and network infrastructures where high bandwidth and fast data transfers are required. The twinaxial design ensures reliable signal transmission and minimizes interference, while the robust construction guarantees a long lifespan. The cable is suitable for operation in a temperature range of 0° to 70° C, making it versatile for various applications. It is an excellent choice for anyone needing a reliable and high-performance connection.
- Maximum data transfer rate of 25 Gbit/s
- Twinaxial design for improved signal transmission
- Operating temperature range of 0° to 70° C
- Compatible with various Cisco devices such as C9300 and N9K.
9. Cisco CATALYST 9300L AND 9300LM STACKING KIT NMS NS CABL
The Cisco C9300L-STACK-KIT2 is a high-quality stacking cable kit specifically designed for connecting multiple Cisco Catalyst 9300L series switches in a stack configuration. With a length of 0.5 meters, this cable enables efficient and reliable connections between the switches, forming a logical unit from several physical devices. This solution simplifies management and enhances network reliability. The robust construction of the cable ensures stable data transmission and minimizes cable clutter in rack environments. Additionally, the kit supports the high bandwidth requirements of modern network infrastructures and allows for seamless expansion of switching capacity. Installation in dense network environments is facilitated by the compact design, while the shielded cabling ensures optimal signal integrity. The stacking kit is compatible with the Cisco Catalyst 9300L series and offers features such as unified management and improved redundancy capabilities.
- High-quality stacking solution for Cisco Catalyst switches
- Optimized for short-distance connections in rack environments
- Robust construction with durable connectors
- Supports high bandwidth requirements of modern networks.
Network cables
CHF679.– CHF1358.–/1m
Cisco CATALYST 9300L AND 9300LM STACKING KIT NMS NS CABL
CAT6, 0.50 m
10. Cisco QSFP-H40G-CU0-5M= InfiniBand Cable QSFP+
The Cisco QSFP-H40G-CU0-5M= InfiniBand cable is a passive copper cable specifically designed for high-speed networks. With a length of 0.5 meters, it allows for a direct connection between QSFP+ ports and offers a maximum data transfer rate of 40 gigabits per second. This cable is ideal for use in Cisco Nexus switches, including models such as 93108TC-EX, 93180YC-FX, 9336C-FX2, and 9372PX-E. Its passive design ensures easy installation without the need for additional power, making it a cost-effective solution for short connections in data centers and network infrastructures. The robust construction guarantees reliable performance and durability, while the standardized QSFP+ interface provides broad compatibility with various devices. The cable is elegantly designed in black and features a convenient pull tab for easy handling.
- Maximum data transfer rate of 40 Gbit/s
- Passive design for easy installation
- Compatible with Cisco Nexus switches
- Robust construction for reliable performance.
Product order
See all products