Best Purecrea products in the Active electronic components category

On this page you'll find a ranking of the best Purecrea products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Purecrea Transistor set 170 pieces assorted

With this assorted transistor set you always have a suitable transistor for your Arduino project at hand! The set consists of 17 different transistors, 10 of each type. The NPN and PNP transistors are perfect for switching small loads or building an amplifier circuit.

Technical details:
Type: TO-92
Quantity: 170 pieces
Weight: 37g

Scope of delivery:
10x S9012
10x S9013
10x S9014
10x S9015
10x S9018
10x A1015
10x C181
10x A42
10x A92
10x 2N5401
10x 2N5551
10x A733
10x C945
10x S8050
10x S8550
10x 2N3906
10x 2N3904
10x S8050.
 

2. Purecrea Diode set 100 pieces assorted

With this diode set you always have the right diode at hand! The set consists of the most commonly used diodes that you need for Arduino projects.

Technical details:
Diode
size: 8 different sizes
Packaging dimensions: 100 x 60 x 10mm
Weight: 25g

Scope of delivery:
25x 1N4148
25x 1N4007
10x 1N5819
10x 1N5399
10x FR107
10x FR207
5x 1N5408
5x 1N5822.
 

3. Purecrea Neopixel Ring 8x WS2812B RGB LED

This 8-bit NeoPixel ring is equipped with small RGB LEDs (5x5mm). There are solder pads on the back that can be easily soldered to the control wires. Several NeoPixels can be switched one after the other and each LED can be easily controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano etc. via an output. There are also many programming examples, just search for NeoPixel or Fastled. We recommend connecting an additional 3300 µF capacitor between GND and 5V to guarantee a stable voltage supply and thus also the service life of the LED.

Technical details:
Operating voltage: 5V DC
Driver chip: WS2812b
Number of LEDs: 8 pieces
LED: 5050 RGB
Colour: black
Diameter outside: 32 mm
Diameter inside: 18 mm
Depth: 2.8mm
Weight: 2.5g

Scope of delivery:
1x Neopixel Ring 8x WS2812B RGB LED.
 

4. Purecrea Neopixel Ring Set with 8/12/16/24 Rings WS2812 RGB LED

This set consists of various large neopixel rings that can be easily broken out. The LEDs are already mounted on a PCB board. The rings can also be easily mounted via the mounting holes. Several NeoPixels can be switched one after the other and each LED can be easily controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano, etc. via an output. There are also many programming examples. Just search for NeoPixel or WS2812. The set contains a total of 61 RGB LEDs WS2812b.

Technical details:
Operating voltage: 5V DC
Current consumption: 20mA per colour and LED (max. = 20mA*3*61= 3660 mA)
Driver chip: 61x WS2812B
LED: 5050 RGB
Colour: White / Black
Size: D=86mm
Weight: 20g

Scope of delivery:
1x NeoPixel with 1 LED's
1x NeoPixel ring with 8 LED's 2812B-8
1x NeoPixel ring with 12 LEDs 2812B-12
1x NeoPixel ring with 16 LEDs 2812B-16
1x NeoPixel ring with 24 LEDs 2812B-24.
 

5. Purecrea Neopixel Stick - 8x WS2812 RGB LED

This NeoPixel RGB LED Stick has 8 small RGB LEDs (5x5mm). The LEDs are already mounted on a PCB strip. The NeoPixel Stick can also be easily mounted via the mounting holes. Several NeoPixel Stick can be switched one after the other and each LED can be easily controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano, etc. via an output. There are also many programming examples. Just search for NeoPixel or WS2812.

Technical details:
Operating voltage: 4-7 V DC
Driver chip: 8x WS2812
LED: 5050 RGB
Colour: White
Mounting holes: diameter 3mm / distance 27mm
Size: 54 x 10 x 3.5mm
Weight: 2.5g

Scope of delivery:
1x NeoPixel Stick with 8 LEDs.
 

6. Purecrea 5m SK6812 RGBCW - 30LED/m LED NeoPixel Strip Roll

This NeoPixel RGBCW LED strip has 150 small RGB LEDs (5x5mm) distributed over a length of 5m. The LEDs are mounted on a PCB strip that can be bent. The strip has a self-adhesive surface on the back for easy sticking. Several NeoPixel Stick's can be connected in sequence and each LED can be controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano etc., via an output. There are also many programming examples. Just search for NeoPixel or WS2812B. The LED strips are soldered at certain points. We recommend connecting a capacitor between plus and minus at the end of the strip to stabilise the voltage. The strips can be cut or soldered at the marked points.

Info: The SK6812 LED is the successor of the popular WS2812B. The biggest difference to the WS2812B is that the SK6812 has an additional cold white LED that can be controlled separately.

Technical details:
Operating voltage: 5V DC
Power: 0.3W per LED
Number of LEDs per metre: 30
Driver Chip: SK6812
Colours: RGB CW (CW=cold white)
LED: 5050 RGBW LED
Wavelength colours: R=650nm G=520nm B=460nm
Brightness levels: 256
Beam angle: 120
Colour PCB: White
Weight: 95g

Scope of delivery:
1X 5m SK6812 RGBCW - 60LED/m LED NeoPixel Strip Roll.
 

7. Purecrea NeoPixel NeoMatrix 8x8 - 64 WS2812 RGB LED

This NeoPixel RGB LED matrix has 64 small RGB LEDs (5x5mm). The LEDs are already mounted on a PCB board. The matrix can also be easily mounted via the mounting holes. Several NeoPixels can be switched one after the other and each LED can be easily controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano, etc. via an output. There are also many programming examples. Just search for NeoPixel or WS2812.

Technical details:
Operating voltage: 5 V DC
Current consumption: 20mA per colour and LED (max = 20mA*3*64=3840mA)
Driver chip: 64x WS2812
LED: 5050 RGB
Colour: white / black
Dimension: 66 x 66 x 3.5mm
Weight: 20g

Scope of delivery:
1x NeoPixel NeoMatrix 8x8 - 64 WS2812 RGB LED.
 

8. Purecrea NeoPixel FlexMatrix 8x8 - 64 WS2812B RGB LED

This NeoPixel RGB LED matrix has 64 small RGB LEDs (4.9x4.9mm). The LEDs are already mounted on a flexible PCB board. Several NeoPixels can be connected one after the other and each LED can be easily controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano etc. via an output. There are also many programming examples, just search for NeoPixel or Fastled. We recommend to connect an additional 3300 µF capacitor between GND and 5V to guarantee a stable voltage supply and thus also the life span of the LED can be reached.
Info: If you want to use the WS2812B matrix with a 3.3V microcontroller like the ESP8266 or ESP32 you need a logic level converter.

Technical details:
Operating voltage: 5 V DC
Current consumption: 20mA per colour and LED (max = 20mA*3*64=3840mA)
Driver chip: 64x WS2812B
LED: 5050 RGB
Colour: White / Black
Size: 80 x 80 x 4mm
Weight: 19g

Scope of delivery:
1x NeoPixel FlexMatrix 8x8 - 64 WS2812B RGB LED.
 

9. Purecrea 5m SK6812 RGBCW - 60LED/m LED NeoPixel Strip Roll

This NeoPixel RGBCW LED strip has 300 small RGB LEDs (5x5mm) distributed over a length of 5m. The LEDs are mounted on a PCB strip that can be bent. The strip has a self-adhesive surface on the back for easy sticking. Several NeoPixel Stick's can be connected in sequence and each LED can be controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano etc., via an output. There are also many programming examples. Just search for NeoPixel or WS2812B. The LED strips are soldered at certain points. We recommend connecting a capacitor between plus and minus at the end of the strip to stabilise the voltage. The strips can be cut or soldered at the marked points.

Info: The SK6812 LED is the successor of the popular WS2812B. The biggest difference to the WS2812B is that the SK6812 has an additional cold white LED that can be controlled separately.

Technical details:
Operating voltage: 5V DC
Power: 0.3W per LED
Number of LEDs per metre: 60
Driver Chip: SK6812
Colours: RGB CW (CW=cold white)
LED: 5050 RGBW LED
Wavelength colours: R=650nm G=520nm B=460nm
Brightness levels: 256
Beam angle: 120
Colour PCB: White
Weight: 114g

Scope of delivery:
1X 5m SK6812 RGBCW - 60LED/m LED NeoPixel Strip Roll.
 

10. Purecrea Neopixel Ring 12x WS2812 RGB LED

This NeoPixel ring is equipped with small RGB LEDs (5x5mm). There are solder pads on the back that can be easily soldered to the control wires. Several NeoPixels can be switched one after the other and each LED can be easily controlled via a microcontroller, e.g. Arduino UNO, Mega, Nano etc. via an output. There are also many programming examples. Just search for NeoPixel or WS2812.

Technical details:
Operating voltage: 5V DC
Driver chip: WS2812b
LED: 5050 RGB
Colour: Black
Diameter outside: 50 mm
Diameter inside: 36 mm
Depth: 3.5mm
Weight: 6g

Scope of delivery:
1x Neopixel Ring 12x WS2812 RGB LED.