You're not connected to the Internet.
CHF 160.–

Thermaltake Water 3.0 Ultimate

Art-Nr 6413966
approx. 2 weeks Currently > 5 piece(s) in stock at the supplier

Availability

Mail delivery

  • approx. 2 weeks
    Currently > 5 piece(s) in stock at the supplier

Collection

  • All locations: approx. 9 – 11 days
    Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

Thermaltake Water 3.0 Ultimate Actual product image
CHF 160.–

Thermaltake Water 3.0 Ultimate

Specifications

Key specifications

SocketAM3, AM2, AM2+, LGA 1366, FM1, LGA 1156, LGA 1155, LGA 2011, AM3+, FM2, LGA 1150, LGA 2011-v3, LGA 1151, AM4, LGA 2066
Rotations speed range1000 - 2000 RPM

General information

Manufacturer Thermaltake
Product type CPU coolers
i

CPU coolers

Computer cooling is required to remove the waste heat produced by computer components, to keep components within their safe operating temperature limits. Various cooling methods help to improve processor performance or reduce the noise of cooling fans.

More information...

Item number6413966
Manufacturer no.CL-W007-PL12BL-A
External links Manufacturer's site (en)

Cooler properties

i

Cooler properties

A cooler is used for heat dissipation, which usually results in a reduction in temperature. A heat sink absorbs the heat, the cooling medium (usually air or water) ensures that the heat is dissipated.

More information...

Fan type
i

Fan type

Describes the type of fan

Watercooled
i

Watercooled

Water cooling is a method of heat removal from components and industrial equipment. As opposed to air cooling, water is used as the heat conductor.

More information...

CPU socket
i

CPU socket

A CPU socket or CPU slot is a mechanical component that provides mechanical and electrical connections between a microprocessor and a printed circuit board (PCB). This allows the CPU to be replaced without soldering.
Common sockets have retention clips that apply a constant force, which must be overcome when a device is inserted. For chips with a large number of pins, either zero-insertion force (ZIF) sockets or land grid array (LGA) sockets are used instead. These designs apply a compression force once either a handle (for ZIF type) or a surface plate (LGA type) is put into place. This provides superior mechanical retention while avoiding the risk of bending pins when inserting the chip into the socket.

More information...

AM3
,
AM2
,
AM2+
,
LGA 1366
,
FM1
,
LGA 1156
,
LGA 1155
,
LGA 2011
i

LGA 2011

LGA 2011, also called Socket R, is a CPU socket by Intel. It replaces Intel's LGA 1366 (Socket B) and LGA 1567 in the performance and high-end desktop and server platforms. The socket has 2,011 protruding pins which touch contact points on the underside of the processor.

More information...

,
AM3+
,
FM2
,
LGA 1150
i

LGA 1150

LGA 1150, also called Socket H3, is an Intel microprocessor compatible socket which supports the future Intel Haswell and Broadwell microprocessors.

More information...

,
LGA 2011-v3
,
LGA 1151
,
AM4
,
LGA 2066
Cooler mounting
i

Cooler mounting

Specifies how the cooler is attached.

backplane
Supported fan sizes
i

Supported fan sizes

Specifies which fan sizes are supported by the product.

120mm

Heat sink properties

i

Heat sink properties

In electronic systems, a heat sink is a passive heat exchanger component that cools a device by dissipating heat into the surrounding air.

More information...

Number of heatpipes
i

Number of heatpipes

A heat pipe or heat pin is a heat-transfer device that combines the principles of both thermal conductivity and phase transition to efficiently manage the transfer of heat between two solid interfaces.

More information...

1
Materials radiator core
Copper
i

Copper

Copper is a chemical element with the symbol Cu (from Latin: cuprum) and atomic number 29. It is a ductile metal with very high thermal and electrical conductivity. Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys.

More information...

Material cooling fins
Aluminium
Hose length
i

Hose length

Length of the hose

326 mm
Length
393 mm
Width
120 mm
Height
27 mm

Fan dimensions

Diameter
120 mm
Length
120 mm
Width
120 mm
Height
25 mm

Fan Properties

i

Fan Properties

A computer fan is any fan inside, or attached to, a computer case used for cooling purposes, and may refer to fans that draw cooler air into the case from the outside, expel warm air from inside, or move air across a heatsink to cool a particular component. The use of fans to cool a computer is an example of active cooling.

More information...

Number of fans
i

Number of fans

Only one of the specified sizes is possible at a time.

More information...

3 x
Maximum mountable fan
i

Maximum mountable fan

Indicates the total number of fans that can be installed.

3
Rotations speed range
i

Rotations speed range

Min. to Max. Fan speed

1000 - 2000 RPM
Air flow
i

Air flow

The volumetric flow rate in fluid dynamics and hydrometry, (also known as volume flow rate or rate of fluid flow) is the volume of fluid which passes through a given surface per unit time (for example cubic meters per second [m3/s] in SI units, or cubic feet per second [cu ft/s]). It is usually represented by the symbol Q.

More information...

168.20 m3/h
Noise level (max.)
i

Noise level (max.)

The sound that is called noise that a device emits when it is active.

More information...

20 dB

Connections

4pin PWM
i

4pin PWM

4pin connector can connect to 3pin connectors.

More information...

1 x

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

This information may include unverified machine translations. Thank you for reporting any incorrect data.

Correction suggestion

Comment

This information may include unverified machine translations. Thank you for reporting any incorrect data.

Returns and warranty

Warranty 24 month Bring-in
30-day right of return
i

30-day right of return

Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Warranty services

Warranty extension

Warranty extension

The warranty is extended at the same conditions as the manufacturer warranty.

to 3 years CHF 21.50
to 5 years CHF 26.90

More information about warranty services

Availability

Mail delivery

Expected delivery time: 2 weeks
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

Expected delivery time: approx. 9 – 11 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately. Information subject to change.

Customer questions and answers

The 3 most helpful customer questions

User sldX1234

Da man noch 3 weitere Radiatoren anbringen kann will ich fragen ob jemand von euch weiss ob dies einen Unterschied macht?

Ich plane den Kühler vorne anzubringen. Sprich, 3 neue Radiatoren vorne anbringen um die Luft reinzuziehen und die 3 beigelegten Radiatoren dazu zu benutzen diese danach nochmal zu ziehen. Ich hoffe ich konnte dies erklären, simpel gesagt sind 3 vorne und 3 hinten angebracht. Die neueren, besseren, als aller erstes um gut Luft reinziehen.

Brauch ich einen 6-way PWM adapter?

09.10.2017
6 answers
User Scope84
Accepted answer

Wichtig ist einen guten Luftfluss im Gehäuse zu gewährleisten. Ob nun Push, Push-Pull oder nur Pull macht am Radiator selber kaum einen Unterschied. Ich habe es mit einem 240er und einem 360er Radiator getestest und alle Ergebnisse waren innerhalb von 2°C an der Kühlflüssigkeit. Macht also am GPU oder CPU praktisch Null Differenz. Habe mich letztendlich bei beiden Radiatoren für Pushsetups (3x120 + 2x120) entschieden, damit man die Lüfter innen nicht sieht. Aus dem Gehäuse herause wird die Luft dann mit 1x140 + 3x120 befördert.

09.10.2017

Ask a question

Ask other customers about product properties, performance or use.
If you have any questions about your order, please contact the Customer service.

Your contributions in the community are subject to the Community terms and conditions.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the Galaxus community.

Rate product
Thermaltake Water 3.0 Ultimate Thermaltake Water 3.0 Ultimate