Easy screw terminals and SMD prototyping on Arduino.
Test-Bericht bei arduino-praxis.ch:
http://arduino-praxis.ch/2012/02/kitreview-power-screwshield/ [1]
The plate is adapted to the dimensions of
Test-Bericht bei arduino-praxis.ch:
http://arduino-praxis.ch/2012/02/kitreview-power-screwshield/ [1]
The plate is adapted to the dimensions of
the Arduino Duemilanove Uno,
it has a pads area allowing you to easily add additional components
necessary to your circuits.
The pads area can also receive a mini breadboard for initial testing
of your prototypes. The pads are square to facilitate the achievement
of solder bridges.
The stackable connectors include all such signals from the arduino
making them available for your prototypes. The signals are clearly
indicated by the silkscreen on the top and bottom.
A specific area allows you to solder a SMD component directly on the
plate.
A molex connector allows power supplies to your installation and your
Arduino with a simple ATX PC power supply, your Arduino easily becomes
autonomous.
For advanced users, when the Arduino is powered by molex plug, a
specific pads area receive 12V (if selected by solder bridge located
on the shield). It allows you to controle 12V equipments, perfect to
controle transistor fans, motors, lamps, LED ribbon, relays, ...
Finally, the status LED can be used (X) into your prototypes with a
cutting track on the bottom (SJ2)
The shield can be mounted on the Arduino Mega however, pins 14 (TX3)
and A7 are difficult to use because partially covered by the shield.
Pins A8 to A15, Digital 22 to 53 and Com 15 to 21 (rear part of the
Mega) are not included on the shield.
Links:
------
[1] http://arduino-praxis.ch/2012/02/kitreview-power-screwshield/
it has a pads area allowing you to easily add additional components
necessary to your circuits.
The pads area can also receive a mini breadboard for initial testing
of your prototypes. The pads are square to facilitate the achievement
of solder bridges.
The stackable connectors include all such signals from the arduino
making them available for your prototypes. The signals are clearly
indicated by the silkscreen on the top and bottom.
A specific area allows you to solder a SMD component directly on the
plate.
A molex connector allows power supplies to your installation and your
Arduino with a simple ATX PC power supply, your Arduino easily becomes
autonomous.
For advanced users, when the Arduino is powered by molex plug, a
specific pads area receive 12V (if selected by solder bridge located
on the shield). It allows you to controle 12V equipments, perfect to
controle transistor fans, motors, lamps, LED ribbon, relays, ...
Finally, the status LED can be used (X) into your prototypes with a
cutting track on the bottom (SJ2)
The shield can be mounted on the Arduino Mega however, pins 14 (TX3)
and A7 are difficult to use because partially covered by the shield.
Pins A8 to A15, Digital 22 to 53 and Com 15 to 21 (rear part of the
Mega) are not included on the shield.
Links:
------
[1] http://arduino-praxis.ch/2012/02/kitreview-power-screwshield/
| Item number | 5998847 |
| Manufacturer | |
| Category | |
| Manufacturer no. | KIT-00501B |
| Release date | 11/22/2016 |
| Weight | 10 g |
Specifications may include unverified machine translations.