Based on a totally new concept of frequency generation, developed by Mutec, the unit offers an unchallanged flexibility for synchronization of different devices to one house clock. On this occasion iClock dp breaks traditional and unflexible forms of chaining input and output signals and allows for the first time their completely free combination and scalability.
The iClock dp’s principle operation is completely different to conventional products. The user, as a matter of priority, defines the clock rates and formates which have to be constantly available at the outputs without any disturbances not depending on the incoming reference signals. Limitations regarding defined combinations of input and output clock signals do not exist.
The iClock dp's philosophy is addressed to provide the highest possible failure safety for all outgoing clock signals which is needed especially for broadcast stations or centralized clock distribution systems. With regards to this functionality up to 3 independent external references can be auto-detected and locked in a user-defined sequence without any phase-jumps or interruptions in the outgoing signals. This applies also to external clock frequency changes, e.g. from 44.1 kHz to 48.0 kHz or reference clock changes, e.g. from video to GPS or AES11. Even a manual change of the reference signal by replugging the clock lines at the input connectors is possible during operation!. If all external references are lost, the iClock dp synthesizes the outgoing clock signals based on the last incoming frequency constantly. This applies also if a reference signal drifts out of the lock range. If the absent reference clock returns the synthesizer will lock gradually again based on iClock's SoftReLock functionality which ensures interruption-free adjustments of all outgoing clock signals. In this case a continuously clock supply for all connected devices is guaranteed during any operation mode.
Using DDS-coupled frequency generation and latest DSP-based filtering technologies in combination with an extremely low-jitter clock basis, the iClock dp eliminates the jitter of incoming reference signals completely. This ensures highest possible jitter attenuation for all outgoing clock signals. As a result the synchronization of connected devices is much more reliable and the sound quality of every AD/DA converter will be increased significantly…more