Product details
The Arduino M0 Pro (also known as Arduino Zero Pro) is a
powerful 32-bit extension of the Arduino UNO platform. The
board is driven by an Atmel SAMD21 MCU, which is connected to an
32-bit ARM Cortex(R)
powerful 32-bit extension of the Arduino UNO platform. The
board is driven by an Atmel SAMD21 MCU, which is connected to an
32-bit ARM Cortex(R)
M0 core.
The power of the Atmel core gives this board a high
flexibility and increases the range of possible applications.
The integrated Embedded Debugger (EDBG) from Atmel offers a
complete debug interface without additional hardware. The EDBG
additionally supports a virtual COM-Port for the
device programming and the Arduino bootloader functionality.
specifications:
* Microcontroller: ATSAMD21G18, 48pins LQFP
* Operating and IO voltage: 3.3V
* Digital I/O pins: 14, 12 of them with PWN, UART
* Analog input pins: 6 (12-bit ADC)
* Analog output pins: 1 (10-bit DAC)
* DC Current per I/O: 7mA
* Flash memory: 256kb
* Clock speed: 48 Mhz
Power supply:
The Arduino M0 can be powered via the micro USB port or with an external
power supply unit. The supply with a battery (Vin & GND)
is also possible. The power source is automatically
selected. The external power supply (non-USB) can either
via a power supply unit (via Power-Jack) or a battery (Gnd and
Vin) shall be made. Attention: In contrast to the previous Arduinos
the ZERO Pro requires a 5V power supply.
The power of the Atmel core gives this board a high
flexibility and increases the range of possible applications.
The integrated Embedded Debugger (EDBG) from Atmel offers a
complete debug interface without additional hardware. The EDBG
additionally supports a virtual COM-Port for the
device programming and the Arduino bootloader functionality.
specifications:
* Microcontroller: ATSAMD21G18, 48pins LQFP
* Operating and IO voltage: 3.3V
* Digital I/O pins: 14, 12 of them with PWN, UART
* Analog input pins: 6 (12-bit ADC)
* Analog output pins: 1 (10-bit DAC)
* DC Current per I/O: 7mA
* Flash memory: 256kb
* Clock speed: 48 Mhz
Power supply:
The Arduino M0 can be powered via the micro USB port or with an external
power supply unit. The supply with a battery (Vin & GND)
is also possible. The power source is automatically
selected. The external power supply (non-USB) can either
via a power supply unit (via Power-Jack) or a battery (Gnd and
Vin) shall be made. Attention: In contrast to the previous Arduinos
the ZERO Pro requires a 5V power supply.
| Item number | 5998709 |
| Manufacturer | |
| Category | |
| Manufacturer no. | A000104 |
| Release date | 11/22/2016 |
| Length | 8 cm |
| Width | 5.50 cm |
| Height | 2 cm |
| Weight | 30 g |
Specifications may include unverified machine translations.