You're not connected to the Internet.
CHF 30.–

Arduino 9 Axes Motion Shield

Art-Nr 5998088
 approx. 4-6 days Currently > 5 piece(s) in stock at the supplier

Availability

  • approx. 4-6 days
    Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

A digitec product

No ratings have been submitted yet for this product.

Rate this product

Description

The Arduino 9 Axes Motion Shield is based on the BNO055 absolute
orientation sensor from Bosch Sensortec GmbH.

The BNO055 is a System in Package (SiP), integrating a triaxial
14-bit accelerometer, a triaxial 16-bit gyroscope with a range of 2000
degrees per second, a triaxial geomagnetic sensor and a 32-bit
microcontroller running the BSX3.0 FusionLib software. The sensor
features three-dimensional acceleration, yaw rate and magnetic field
strength data each in 3 perpendicular axes. It also provides the
sensor fusion signals such as

* Quaternion
* Euler angles
* Rotation vector
* Linear acceleration
* Gravity vector

In addition, it incorporates an intelligent interrupt engine, which
allows for triggering interrupts based on

* slow or no motion recognition
* any motion (slope) detection
* high-g-detection.

The shield is TinkerKit compatible, which means you can quickly
create projects by plugging TinkerKit modules to the board.

Power:

* Operating Voltage: 5V
* Power Consumption: 50mW

Input and Output:

The shield features several TinkerKit input/output and communication
interfaces. Connecting TinkerKit modules can simplify the creation of
a project or a prototype.

The on-board connectors are :

* 2 TinkerKit Inputs: IN2 and IN3 (in white), these connectors are
routed to the Arduino A2 and A3 analog input pins.
* 2 TinkerKit Outputs: OUT5 and OUT6 (in orange), these connectors
are routed to the Arduino PWM outputs on pins 5 and 6.
* 2 TinkerKit TWI: these connectors (4-pin in white) are routed on
the Arduino TWI interface. Both connect to the same TWI interface to
allow you to create a chain of TWI devices.

Compatibility:

The Arduino 9 Axes Motion Shield is compatible with Uno, Yn, Leonardo,
Ethernet, Mega and Due boards. When using the Arduino 9 Axes Motion
Shield, be sure to solder the Interrupt bridge and Reset bridge in the
correct position depending on the board used. See table:

BOARD

INTERRUPT PIN

RESET PIN

Arduino Uno

D2

D4

Arduino Leonardo

D7

D4

Arduino Yun

D7

D4

Arduino Ethernet

D2

D4

Arduino Due

D2

D4

Arduino Mega

D2

D4

Examples:

In the Arduino IDE you will find the following examples, go to File ->
Examples of Arduino IDE, under NAxesMotion, there are 4 sketches for
the use of 9 Axes Motion Shield:

* Accelerometer
Example code to stream Accelerometer data
* BareMinimum
Example code to describe the Bare Minimum
* Euler
Example code to stream Euler data
* Motion
Example code of a game to demonstrate the Any motion and No motion
Interrupt features
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Arduino
Product type Electronics kit
Item number5998088
Manufacturer no.A000070

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: galaxus@galaxus.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Expected delivery time: approx. 4-6 days
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

 Expected delivery time: approx. 4-6 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the Galaxus community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the Galaxus community.

(0)
Rate product
Arduino 9 Axes Motion Shield Arduino 9 Axes Motion Shield