You're not connected to the Internet.


The Arduino 4 Relays Shield is a solution for driving high power loads
that cannot be controlled by Arduino's digital IOs, due to the current
and voltage limits of the controller.

The Shield features four relays, each relay provides 2 pole changeover
contacts (NO and NC); in order to increase the current limit of each
output the 2 changeover contacts have been put in parallel. Four LEDs
indicate the on/off state of each relay.


Operating Voltage


Coil current consumption

140 mA (with all releays on, about 35 mA each)

Single pole chargeover contact maximum current

@ 30 V DC 2A

Maximum load voltage

48 V

Maximum switching capacity

60 W


The shield doesn't need external power: it will be provided by the
base board, through the 5V and 3.3V pins of the Arduino board used as

Input and Output

The relays are controlled by the following Arduino board pins:

* Relay 1 = Arduino pin 4
* Relay 2 = Arduino pin 7
* Relay 3 = Arduino pin 8
* Relay 4 = Arduino pin 12

The shield features several TinkerKit input/output and communication
interfaces. Connecting TinkerKit modules can simplify the creation of
a project or a prototype.

The on-board connectors are :

* 2 TinkerKit Inputs: IN2 and IN3 (in white), these connectors are
routed to the Arduino A2 and A3 analog input pins.
* 2 TinkerKit Outputs: OUT5 and OUT6 (in orange), these connectors
are routed to the Arduino PWM outputs on pins 5 and 6.
* 2 TinkerKit TWI: these connectors (4-pin in white) are routed on
the Arduino TWI interface. Both connect to the same TWI interface to
allow you to create a chain of TWI devices.

Physical Characteristics

The maximum length and width of the 4 Relays Shield PCB are 2.7 and
2.1 inches respectively. Four screw holes allow the Shield to be
attached to a surface or case. Note that the distance between digital
pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil
spacing of the other pins.


The shield is compatible with all the Arduino boards, 5V and also 3.3V


Click 'show more' to display specifications.

General information

Manufacturer Arduino
Product type Electronics modules
Item number5998102
Manufacturer no.A000110
Sales rank in Product type Electronics modules35 of 1126

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)


Report incorrect data

Correction suggestion


Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us:

Returns and warranty

Warranty 24 month Bring-in
30-day right of return

30-day right of return

This product may be returned within 30 days after shipment or collection. A minimum of 10% will be deducted from opened products. Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.


Mail delivery

 Expected delivery time: approx. 8–10 days
Currently 1 piece(s) in stock at the supplier


All locations

 Expected delivery time: approx. 8–10 days
Currently 1 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the Galaxus community.

Ask a question

500 / 500 characters

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the Galaxus community.

Rate product
Arduino 4 Relays Shield Arduino 4 Relays Shield