The ice cream case Bendingtool is probably the most comprehensive tool set for all those who want to equip their PC with hard tubes. All tools, angles and other necessary products needed for bending HardTubes can be found in this case.
1. complete equipment for the ambitious HardTube user
2. mounting of all bending radii on the mounting plate possible
3. unique, 3D bending of HardTubes possible
4. no more tools needed
5. stable and noble case in which all tools are stored tidily
The Alphacool Ice Case is probably the most extensive collection of tools to bend HardTubes, with 13 or 16mm diameter, into almost any shape. All tools have a separate place in the large, noble and sturdy case. This means that all parts are clearly arranged and tidied up.
With the rubberized gloves you have everything under control and are protected against splinters and dirt. With the deburring tool the HardTubes can be deburred wonderfully. This is mandatory so that they can be properly plugged into the corresponding connections. A long and stable saw and a cutting gauge simplify the cutting of HardTubes. The cutting gauge can be attached to a table edge with special, enclosed screw clamps. The inside of the cutting gauge is rubberized to prevent scratches and slipping of the HardTubes. With the extensive measuring tools not only the lengths but also two or more angles can be measured simultaneously. This greatly facilitates the planning and execution of various bends. An extensive range of bending radii and angles can be built up on the bending plate to actually bend the desired shape perfectly. The basis here is supplied by two bending feeders of different sizes and two circular-arc feeders. This allows all classic bending radii to be carried out. The fitting stops can also be used to simulate the depth of an Alphacool fitting. This ensures precise measurement and perfect bending when using Alphacool products. Alternatively, the feeders with pin stop can be used if other products should come into play.
On the bending plate there is an area on which specially created or very special bending forms can be realized. For this purpose, there are special Flex bending feeders in the case which can be positioned almost freely. A 30° angle followed by a 2cm long straight line and another 20° angle is required? No problem, almost anything is possible with these bending feeders. The whole thing will be extended by a real highlight. Instead of just bending on a 2D surface, Alphacool supplies flexible 45° and 90° bending feeders in this case. This allows an angle from the surface to the height to be realized. The flexible angles can also be tilted. This means that the angle is not fixed to be able to bend only vertically upwards, but can also be turned horizontally by up to 180°. A corresponding angle display helps to set the desired angle. Silicone inserts for HardTubes with 13 and 16mm diameter are included to complete the package.
A comprehensive manual showing all functions and possibilities of the icecase can be downloaded from the Alphacool website.…more