You're not connected to the Internet.


This pressure sensor from Freescale is a great low-cost sensing
solution for measuring barometric pressure. At 1.5 hPa resolution,
it's not as precise as our favorite pressure sensor, the BMP085, which
has up to 0.03 hPa resolution so we don't suggest it as a precision
altimeter. However, it's great for basic barometric pressure sensing.
The sensor is soldered onto a PCB with 10K pull-up resistors on the
I2C pins.

This chip is good for use with power and logic voltages ranging from
2.4V to 5.5V so you can use it with your 3V or 5V microcontroller.
There's a basic temperature sensor inside but there's no
specifications in the datasheet so we're not sure how accurate it is.

Using the sensor is easy. For example, if you're using an Arduino,
simply connect the VDD pin to the 5V voltage pin, GND to ground, SCL
to I2C Clock (Analog 5 on an UNO) and SDA to I2C Data (Analog 4 on an
UNO). Then download our MPL115A2 Arduino library and example code for
temperature, pressure and basic altitude calculation.Install the
library, and load the example sketch. Immediately you'll have the
temperature, pressure and altitude data printed in the serial console.


* Arduino-Library @ GitHub [1]

Technical Details

* PCB weight: 0.61g
* Vin: 2.4 to 5.5 VDC
* Logic: 3 to 5V compliant
* Pressure sensing range: 500-1150 hPa (up to 10Km altitude)
* 1.5 hPa / 50 m altitude resolution
* This board/chip uses I2C 7-bit address 0x60



Click 'show more' to display specifications.

General information

Manufacturer Adafruit
Product type Electronics modules
Item number5998677
Manufacturer no.ada-992

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)


Report incorrect data

Correction suggestion


Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us:

Returns and warranty

Warranty 24 month Bring-in
30-day right of return

30-day right of return

This product may be returned within 30 days after shipment or collection. A minimum of 10% will be deducted from opened products. Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.


Mail delivery

 Expected delivery time: approx. 6–8 days
Currently > 5 piece(s) in stock at the supplier


All locations

 Expected delivery time: approx. 6–8 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the Galaxus community.

Ask a question

Ask other customers about product properties, performance or use.
If you have any questions about your order, please contact the Customer service.

Your contributions in the community are subject to the Community terms and conditions.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the Galaxus community.

Rate product
Adafruit MPL115A2 I2C Barometric Pressure/Temperature Sens Adafruit MPL115A2 I2C Barometric Pressure/Temperature Sens